With just a few simple steps, SkynPen™ takes you beyond surface care - awakening collagen, smoothing texture, and restoring your glow from within.
1. Disinfect the Cartridge (Before Use)
Always disinfect the needle cartridge before each use to ensure a safe, hygienic treatment.
Use 70%+ isopropyl alcohol and a clean container. Let the cartridge soak for a few minutes or spray the needle head and allow it to air-dry completely.
2. Insert the Needle Cartridge
Carefully remove a sterile cartridge from its packaging. Align the cartridge’s round slots with the device connector slots and push it in horizontally until it clicks. Lock it in place by turning it counter-clockwise.
3. Adjust the Needle Length
For home use, keep the needle depth at or below 0.5 mm — ideal for glow, hydration, fine lines, and mild texture concerns.
Use the adjustment ring on the device:
• Turn clockwise to increase needle length.
• Turn counter-clockwise to decrease needle length.
Ensure the device is powered on before adjusting the depth.
4. Set the Speed & Power On
Press and hold the power button for 2 seconds to switch the device on or off.
It starts at the lowest speed and increases with each short press.
The faster the indicator light blinks, the higher the speed level (1–5).
5. Glide Gently
Move the pen in smooth vertical, horizontal, and diagonal motions without applying excessive pressure.
Focus on areas with fine lines, scars, uneven tone, or enlarged pores.
6. Aftercare
Immediately apply a hydrating, soothing serum (e.g., hyaluronic acid or peptides).
Avoid retinoids, acids, sun exposure, and heavy workouts for at least 48 hours.
Always finish with SPF during the day.
7. Remove the Cartridge (if needed)
Twist the cartridge clockwise and pull it out horizontally while pressing the release points.
| Tip Type | Recommended Use |
|---|---|
| Round Nano | Sensitive & vascular skin; reduces redness; painless infusion; nourishment |
| 3×3 Nano | Smooth finish; natural glow; hydration & tone refinement |
| 5×5 Nano | Wide serum delivery; gentle infusion; no puncture; nourishment |
| 12‑Pin | Wrinkles & folds; stretch marks; scars; pore tightening; firming & hydration |
| 24‑Pin | Fine lines; small spots; discolorations; brightening & rejuvenation; pore tightening; hydration & nourishment |
| 36‑Pin | Texture & glow; small spots & discolorations; brightening & rejuvenation; pore tightening; hydration & nourishment |
| 42‑Pin | Spots & discolorations; skin rejuvenation; pore tightening; BB Glow treatments |
| Skin Area | Recommended Speed |
|---|---|
| Face (general) | 1–4 |
| Forehead | 1–3 |
| Cheeks | 2–4 |
| Nose | 1–2 |
| Between eyebrows | 1–3 |
| Eye area | 1–3 |
| Upper lip area | 1–2 |
| Cheekbone area | 1–3 |
| Body (general) | 4–6 |
The correct speed ensures precision, comfort, and visible results.
Start slow, observe your skin, and adjust as you gain confidence.
Microneedling shouldn’t hurt — but it should work.
SkynPen™ gives you precise control from 0.25 mm to 3.0 mm, so you can tailor every session to each area of your face and body. Gentle for sensitive zones, powerful for visible transformation.
Safety: For at‑home use, keep depth ≤ 0.5 mm for maximum safety and optimal healing.
Unlike dermarollers, SkynPen™ adapts to your skin, treating both the epidermis and dermis to trigger collagen and deliver lasting results.
Please speak with your doctor before purchasing any SkynPen™ products. The content on this site is not intended to substitute for medical advice from a qualified physician, pharmacist, or licensed healthcare provider. Our devices and cartridges are cosmetic tools and not evaluated by the FDA. Not intended to diagnose, treat, or prevent any disease. If you have any concerns, consult your GP or dermatologist.